Thermomat for concrete warming up
Electric mats are made on the basis of a flexible heat-radiating film on the patented technology.
Thermomats their scope and advantages of use
Electromats became irreplaceable in situations when warming up of soil or warming up of concrete is necessary. Today they are widely applied in various spheres, especially in construction as have a set of indisputable advantages in comparison with other means to electrowarming up of concrete and soil.
Advantages at warming up of soil and concrete
- Small energy consumption (consumption is 20-25% less than at warming up by wires);
- The technology is certified
- When heating concrete zones of a local overheat are not formed;
- Repeated application;
- Mobility;
- Simplicity of installation;
- Reliability and durability.
Concrete warming up by thermomats
Warming up of concrete in summer and winter time remains the main scope of heat-radiating electric mats. They can be used for heating of again poured concrete, and, any designs. Such warming up is ideally suited for horizontal designs - coverings and overlappings of buildings, pavings, floors and other building constructions. Thermomats are quite widely applied not only to concrete warming up, but to acceleration of a turn of timberings in summertime and accelerations of curing of concrete in the winter. Infrared electromats create good conditions for concrete curing as create the uniform thermal stream which is deeply getting about concrete weight.
Use of thermoelectromats for a warming up of frozen soil
Thermomats are the most eco-friendly and safest way of a warming up of soil. Are very often used in the winter before carrying out land works. Electromats have high efficiency, expenses of the electric power would not raise what strong the frost was not.
Scopes of thermoelectromats
- Warming up of concrete in winter and summer conditions for acceleration of construction works;
- Heating of pipelines;
- Warming up of inclined and horizontal surfaces of monolithic reinforced concrete designs, stone bases;
- Warming up of frozen soil in field conditions;
- Warming up of various capacities and barrels;
- Warming up of a stone laying for a production intensification.
Features of installation of electrothermomats
Installation is carried out at observance of technology of installation does not cause difficulties. Fastening of mats is among themselves carried out by means of cringles.
Technical characteristics and complete set
- The sizes of 2750х1200х10 mm (if necessary are made by the customer's sizes);
- The power supply is the electric network ~ 220B;
- The consumed el.moshchnost — 300 - 600 W / kv.m;
- Heating temperature regulators (built-in);
- Cringles;
- Weight - about 2 kg.
The device is completely ready for operation, equipped with the heater, thermal insulation, sensors of adjustment of temperature and a waterproof cover.